- Features
- Specifications
- Documents
Features
- Metal enclosed, split phase motor, permanently lubricated, thermal overload protected
- Heavy duty thermoplastic or cast iron constructed pump housing and base
- Top intake strainer is part of pump housing, passes lint
- No strainer to deteriorate, replace or periodically clean
- 7-1/2 in cord length, Three wire cord and plug cord type
- High-impact, PVC (1-1/2 in OD) column
- Non-corrosive shaft
- Reliable positive-displacement switch
- Chemically - resistant, polyethylene float
- Plated steel float rod
- Nylon guide
- Permanently-lubricated upper sleeve bearing
- Durable lower bronze bushing
- Adjustable 12 in cycle, factory set at 9 in (22.8 cm)
- 16 in maximum ON, 4 in minimum OFF
- 18 in x 22 in minimum pit size recommended
Standard Approvals
- CSA Certified
Amperage Rating:
5.7 A
Bearing Type:
Sleeve
Flow Rate:
50 gpm
Frequency Rating:
60 Hz
Horsepower:
1/3 hp
Impeller Type:
Non-Clogging Vortex
Material:
Thermoplastic/Cast Iron
Maximum Head:
21 ft
Motor Speed:
1725 rpm
Outlet Size:
1-1/2 in FPNT
Phase:
1 ph
Temperature Rating:
130 deg F
Voltage Rating:
115 VAC