- Features
- Specifications
- Documents
Warranty Length
- Limited
Features
- Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems
- Corrosion-resistant, powder coated epoxy finish
- No steel sheet metal parts to rust or corrode
- Stainless steel screws, guard, handle and switch arm
- No screens to clog
- Watertight neoprene square ring between motor and pump housing
- Solid, buoyant, polypropylene float
- oil filled, hermetically-sealed, automatic reset thermal overload protected motor
- Upper and lower sleeve bearings running in bath of oil
- Entire unit pressure-tested after assembly
- Carbon and ceramic shaft seal
- Passes 1/2 in spherical solids
- Watertight and dust-tight
- Permanently oiled bearings
- 7-1/4 in on point, 3 in off point
- Cast iron switch case, motor and pump housing
- Engineered thermoplastic base
- Engineered, glass-filled, plastic impeller with metal insert
- Stainless steel guard and handle
- Lower and upper bearings, oil-fed cast iron
Standard Approvals
- CSA Certified
- SSPMA Standard
- UL Listed
Amperage Rating:
9.7 A
Bearing Type:
Sleeve
Cord Type:
3-Wire
Domestic/Import:
Domestic
Enclosure Type:
Auto Reset Thermal Overload
Flow Rate:
43 gpm
Frequency Rating:
60 Hz
Horsepower:
3/10 hp
Impeller Type:
Non-Clogging Vortex
Material:
Cast Iron
Maximum Head:
19-1/4 ft
Motor Speed:
1550 rpm
Outlet Size:
1-1/2 in NPT
Phase:
1 ph
Temperature Rating:
130 deg F
Voltage Rating:
115 VAC