- Features
- Specifications
- Documents
Warranty Length
- 15 Years Limited on Heat Exchanger in Residential, 6 Years Limited on Heat Exchanger in Commercial, 5 Years on all Parts
Features
- Ultra low NOx condensing technology provides 0.93
- Copper primary heat exchanger, secondary heat exchanger is made of marine grade type 316L stainless steel to protect against corrosion
- Air-fuel ratio (AFR) sensor, exhaust and water temperature safety control, overheat cut-off fuse
- Exhaust, 3 in PVC venting up to 70 ft or 4 in PVC venting up to 100 ft
- Provides flexible venting with PVC, CPVC or ABS pipe for intake and exhaust (solid core only)
- Category IV stainless steel venting can also be used
- A built-in temperature controller and advanced diagnostics to simplify troubleshooting
- Complies with California SCAQMD Rule 1146.2 and other air quality management districts with similar NOx emission requirements of 14 NG/J or 20 ppm
- Approved for installation from sea level to 10100 ft elevation
Standard Approvals
- ANSI Z21.10.3
- AHRI Certified
- CSA 4.3
- ENERGY STAR® Qualified
Commercial/Residential/Dual:
Commercial/Residential
Condensing/Non Condensing:
Condensing
Energy Factor:
0.9
Flow Rate:
6.6 gpm
Fuel Type:
Natural Gas
Gas Connection:
1/2 in NPT
Gas Type:
Natural
Heating Capacity:
120000 Btu/hr
Height:
29.5"
Ignition Type:
Electronic
Indoor/Outdoor:
Indoor
Length:
17.75"
Pressure Rating:
15 to 150 psi
Ultra Low NOx:
Yes
Vent Size:
3 in, 4 in
Vent Type:
Direct/Power
Water Connection:
3/4 in NPT
Width:
13.125"
Net Weight:
53